Flow Regulator

Instruction for Use

1)Place the I.V. solution container at about 80 cm above the outlet level.

2)Connect the I.V. set to the container.

3)Connect the Extension Set with Regulator to the I.V. set (not necessary if Regulator is already contained in I.V. set)

4)Open the clamp to begin priming the line.

5)Check that liquid is coming out of the end of the line.

6)Regulator is provided in the OPEN position.

7)PRIME Regulator completely turning Regulator from OPEN position to OFF position and then adjust the Regulator scale to the required value.

8)Connect the I.V. line to the catheter or needle.

9)Double check that Regulator is delivering the required flow rate by counting the drops. * In order to change the flow rate, adjust height of I.V. solution container. Raise the container to increase the flow rate, lower the container to decrease it.